Quotations are hereby invited for the following: Supply, install and commission 11KV panel x 1000. Scope: 1. Panel dimensions 130mm x 67mm x 240mm in order to fit in the existing bay. 2. CT ratio 500/5 with 10P10 as an accuracy class. 3. Must be free standing similar to LM 3 pole Reyrolle panel. 4. Must be compatible for LMR and LMS Metalclad indoor 630a/1250A circuit breakers. 5. Must be supply with fully wired phase 3 relay with its accessories. 6. All protection associated equipment and devices must operate with 110V DC. 7. Panel must have all applicable interlocks and be fitted with heater. 8. Panel must have set of Busbar and cable spout bushings rated 12kv. 9. To increase operator safety, the panel must be fitted with remote switching. 10. Must withstand at least 20kA fault current. 11. Must withstand at least 12kv and 50Hz under normal conditions. 12. Must withstand 1250A under normal conditions. 13. Panel can be either new or new second hand. 14. COU will carry out assessment before the panel is accepted. 15. Service provider must supply valid high voltage certificate. 16. Service provider must provide proof of previous experience. 17. Colour of the panel must be similar to the existing Reyrolle panels. 18. Final coat must be able to withstand coastal environment. 19. Panel must also have status indication lights. (Offerte №77884069it)