su lavori elettrici: South Africa appalti, appalti pubblici 2024




Registrati

Condividi:
totale: 244
16 may
Eskom Holdings SOC Ltd (hereinafter “Eskom”) invites you to submit a tender for the following: Inspection and repairs of ducting on units 1, 2, 4, 5 and 6 during planned outages for Duvha Power Station. The scope of modification is as follows: • Full inspection and submit report; • Grease bearings and ball joints on links; • Remove bearing stuffing box cover, clean shaft, repack & box up bearing stuffing box; • Fit new packing on all ducting inspection doors; • Replace flue gas damper doors, shafts, shaft pins, frames, divisional plates, bottom supports, 30mm square bars, 80 x 6mm seals on doors, bearings, links including mechanical settings after replacements. Doors to be collected from the stores by the contractor; • Replace all 30mm square bar sealing strips on flue gas damper; • Replace all 80 x 6mm seals on the flue gas damper doors; • Mechanical, electrical stroke checking and settings of all dampers; • Clean all debris and ash pile up within the ducting including FD fan intake screens using plastic bags; • Cut access Holes and install handrails around the holes 2500 x 1500 meters, replace after completion of internal work; • Open access doors; • Replace 6mm - 10mm thick eroded plate by welding new; • Replace 12mm - 16mm thick eroded plate by welding new; • Repair grease pipes & nipples; • Close access doors; • Vertical weld repairs on 6 - 10mm plate; • Vertical weld repairs on 12 - 16mm plate; • Horizontal weld repairs on 6 - 10mm plate; • Horizontal weld repairs on 12 - 16mm plate; • Replace bearings; • Replace 80 x 80mm angle iron Stiffeners; • Replace 100 x 50mm channels in front of doors, position of channel to be in line with 100% open door position; • Replace 100, 120, 250, 300mm x 6mm protection plates; • Replace 80Nb stays with 100 x 10mm protection (protection plate), Unit 1, 2, 4, 5 and 6 vanes: • Replace 1650 x 520 x 6mm deflector vanes and 1650 x 25 x 10mm flat bar protection (Top); • Replace 1500 x 260 x 6mm deflector vanes (middle); • Replace 1645 x 480 x 6mm deflector vanes (bottom); • Replace 1650 x 25 x 10mm deflector vanes (top). Economiser outlet to A/H inlet: • Replace 6mm-10mm thick eroded plate by welding new; • Replace 10mm-16mm thick eroded plate by welding new; • To fit 196 50mm socket and plugs; • Deflector plate 1200 x 2500mm; • Repair 25 x 10mm Dividing walls protection; • Replace round bar on ducting access ladders; • Remove and replace 16mm, 25mm round stainless steel thermocouples pockets with protection; • Replace 80 x 6mm seals on the flue gas damper; • Replace 35mm square bar sealing strips on the flue gas dampers; • Fit new packing; • Cut and replace 60 x 6mm wide expansion joint sections; • Attach chains and damps to hanger rods; • Replace cell inlet damper stainless steel seals; • Replace cell inlet damper 40 x 40 x 6mm angle iron; • Replace 120 x 75mm round shaft on the flue gas damper. (EN) Aggiungi a preferiti
Scadenza per le domande in : 38 giorni
Cliente: ONLINE TENDERS

Numero: 104488295

Nazione: South Africa

Fonte: ONLINE TENDERS

08 may
Quotations are hereby invited for the following: Provision of hire 12 x 3m park home for 8 months. The purpose of the scope of work is to source a bidder to render a services of leased ten (12) x 12m x 3m park home at Transnet Port Terminals Pier 1 & 2 Container Terminal for the period of eight (8) months. The service shall include: • Provision of park home as per specification; • Maintenance and repairs of park home for the duration of the contract; • Provision and installation of all required spared during repairs and maintenance for the duration of the contract. Estimated measurement: • Park home size 12m x 3m park homes. Material to be used (but not limited to service provider’s advice as a subject matter expects): • Wall: Chromadek wall painted in white; • Flooring: Normal industrial flooring; • 2 x Door Chromadek; • 2 x windows (sliding) (900 x 1200) with tinted and 3 vertical blinds; • 1 x Light switch; • 3 x Single fluorescent tube; • Skirting for electric wires; • 2 x single plug (two each side); • 220 DB board; • COC certificate for park homes electrical connection (by competent person); • 1 x isolated air conditioner; • 2 x step; • 2 door cupboard with one sink basin; • 1 x 10L hydroboil; • 1 x Serviced fire extinguisher with the signage (each park home); • 1 x Sanitizer dispenser (each parkhome); • Exit signage (each park home) requirements. Location of service: DCT Pier 2. Please note that this quotation was published late. (EN) Aggiungi a preferiti
Cliente: ONLINE TENDERS

Numero: 104103975

Nazione: South Africa

Fonte: ONLINE TENDERS

08 may
Bids are hereby invited for the following: Supply and install new hot water gas geysers and gas cylinders at Uilenkaalsmond Resort. Specifications: 1. The existing walls around the diesel tank to be removed. Two walls to be built: 8m long, 1.8m high, and 230mm wide – situated on the corners in the boiler room. A solid floor raised 5cm to be laid. A non-flammable roof fitted over. The electrical cable on the wall to be moved out the gas cage; 2. 3 x 1m lockable security gates to be installed to protect the gas cylinders; 3. Plumber to provide sufficient cold water to both geysers and isolate hot water pipe to the men’s and ladies’ ablution facilities. Men’s geyser installed in boiler room. Ladies’ geyser in the ladies disabled toilet, in a lockable box; 4. Provide an emergency backup power inverter to power both geysers for at least four hours. Connect power from the inverter to both geysers; 5. Replace block 1 and block 2 boiler room doors with secure louvered aluminum doors; 6. Repair boiler room roof, clean and paint room; 7. Provide 3 x 3 stainless steel manifold, HP auto changeover regulator, two high demand low pressure regulators, 20m pex pipe, valves and connectors as required to connect two geysers; 8. Provide 2 x 28L Class C internal gas water heaters; 9. Provide 6 x 48kg gas cylinders filled with LPG; 10. Have a fire plan drawing prepared for approval by the fire department before commencement of work; 11. Provide fire extinguisher required for gas fires and protective cover; 12. Display all relevant signs as required; 13. Issue a certificate of compliance on completion of work. (EN) Aggiungi a preferiti
Scadenza per le domande in : 5 giorni
Cliente: ONLINE TENDERS

Numero: 104108283

Nazione: South Africa

Fonte: ONLINE TENDERS

26 apr

Numero: 103549968

Nazione: South Africa

Fonte: ONLINE TENDERS

13 apr
Transnet National Ports Authority Port Elizabeth invites tenders for the provision of electrical and maintenance services at the Port of Port Elizabeth for a period of 3 (three) years, as and when required. Scope of work includes but not limited to: - MV and LV switchgear: • Inspection, service, and repairs of circuit breakers. Replacement of MV circuit breaker is excluded; • Inspection, repair, supply and replacement of metering equipment; • Inspection, service and repairs of the bus couplers and associated equipment that will exclude the replacement of bus couplers and associated equipment; • Fault finding and repairs on the substation equipment; • Supply and install LV Protection equipment and circuit breakers; - Inspection, repairs, and servicing of MV and LV protection equipment. Replacement of MV protection equipment is excluded; - Supply and install LV Protection equipment and circuit breakers. Distribution cables: • Supply and installation of piping sleeves required; • Supply, excavation and installation of underground cables and cable sleeves. Protection of the existing underground cables and cable sleeves; • Testing and fault finding on all cables; • Repairs and joining of all cables; • Fault finding, issuing of certificates of compliance and reporting of electrical installation conditions for buildings around the Port; • Generators servicing and repairs. Supplying and installing new generators is excluded; • Generator hire will be limited to 30 days in a year from the contractor; • Checking and maintain of all earthing system to ensure impedance is within limits (Maximum 7 OHMS) this will include common earth, earth spikes and earth mat, panel earthing integrity, cable earths on end boxes; • Any work to be done on the large floor-mounted switchboard in substations, mounted switchboard in brick kiosks, glass fibre kiosks and wall-mounted switchboard must be approved by a TNPA Senior Electrical Engineer or Electrical Engineer; • Inspection, service, repairs, and replacement of substation extractor fans of a same extractor fans; • Inspection, service, and repairs to sewage pumps. Replacement of the sewerage pump is excluded. • Inspect, service and repair portable electrical equipment (1200 ton high mast winches/power tools/Battery operated tools/test equipment); • Supply and install distribution board in all TNPA buildings. (EN) Aggiungi a preferiti
Cliente: ONLINE TENDERS

Numero: 102806175

Nazione: South Africa

Fonte: ONLINE TENDERS

09 apr
Quotations are hereby invited for the following: Major service and 36-month statutory inspection of Boiler 2 (John Thompson coal-fired steam boiler) as well as ancillary equipment neglected in the boiler house: Specifications: • Strip the boiler as required for external and internal inspection, • Chemical clean of water side (acid wash), • HP cleaning of tubes, as required, • Sand blasting of tubes & shell, as required, • Service/repair of stoker mat and stoker drive, • Service of all valves, including test certificates for safety valves, • Calibration of pressure gauges, • Refurbishment of gauge glass assembly, cocks, and Mabrey level controls, • Refurbish the FD fan, and ID fan (replace all belts and bearings), • Replacement of guillotine door, and cables, • Replace ignition arch, side seals, etc, • Rebuild the ash wall, • Refurbish 2 x Grundfos feed pumps, • Clean out the electrical panel, • Prepare the boiler for 3-year statutory inspection, • Provide a certified AIA inspection authority to conduct a complete statutory inspection, including pressure test in accordance with the PER 36-month inspection requirements, • Reassemble the boiler, including all new gaskets, lagging and stainless-steel cladding, and refractory brickwork, • Re-commission the boiler and test all safety functions, • Provide a hardcopy inspection book including all test certificates, service records, and certificate of continuance, • Compressor hire must be provided by the contractor, as there is no compressed air supply available in the boiler house, • Any scaffold hire, scaffold erection & inspection must be provided by the contractor, • Replace grit collector, • Replace ash trolley for grit collector, • Replace impellor on ID fan, • Install a Shut of valve on main steam line to factory, • Replace condensate line and replace condensate pumps, from EA to hot well, • Install meter at discharge on hot well, • Overhaul suit blower for boiler no 1 & 2, • Provide project plan and time frame. A standard Safety File must be submitted in hardcopy prior to any work commencing on site. (EN) Aggiungi a preferiti
Cliente: ONLINE TENDERS

Numero: 102531312

Nazione: South Africa

Fonte: ONLINE TENDERS